Conest Case Study - Comanche Gas via Paul Foster

How Comanche Gas Solutions Uses IntelliBid to Estimate Power Distribution Work Faster

Paul Foster first estimated with Conest software in 1997. When he joined Comanche Gas Solutions in 2026, he convinced the company to buy IntelliBid, and he has already used it to put together $7 to $8 million worth of work.

Comanche Gas Solutions is an energy infrastructure company headquartered in Comanche, Texas. It provides behind-the-meter natural gas power, fuel management, and turnkey site services for data center, industrial, and oil and gas customers. Its electrical construction work runs from medium-voltage distribution through fixtures and finish.

Paul estimates that work with IntelliBid electrical estimating software. His estimates cover underground and overhead power distribution, site utilities, and duct banks, and IntelliBid’s pre-built assemblies do much of the work for him.

For Paul, the payoff came quickly and has lasted decades: estimates that took a long time by hand became about four times faster with Conest, and the software paid for itself.

Electrical Estimating Software

Estimate Underground and Overhead Work Faster

See how IntelliBid assemblies build conduit, concrete, wire, and labor into your estimate from a few simple inputs.

Request an IntelliBid DemoExplore IntelliBid

Comanche Gas Solutions: At a Glance

Comanche Gas Solutions

Industry
Energy infrastructure and electrical power distribution
Headquarters
Comanche, Texas
Interviewee
Paul Foster, Estimator
Conest Product
IntelliBid
Conest User Since
1997
Project Types
Underground and overhead power distribution, duct banks, site utilities, generator plants, and infrastructure for data center construction
Challenge
Estimate large infrastructure projects quickly, often before the engineering is complete
Result
Estimating about four times faster than by hand, quick payback, and $7 to $8 million worth of work estimated in a short time

Estimating With Conest Since 1997

Paul’s history with Conest goes back almost to the company’s beginning. In 1997 he owned an electrical and mechanical contracting company, and George Hague, Conest’s founder, came to his office and sold him his first estimating software.

Paul used Conest at his own company for more than 20 years, from 1997 to 2018. He then spent about eight and a half years with general construction companies, overseeing MEP installations. Along the way, his career has included casinos and other large projects, some of them billion-dollar builds.

Conest kept growing during those years. In 2017 the company joined JDM Technology Group, and IntelliBid has continued to add to the same core estimating approach Paul learned in the 1990s.

When Paul returned to electrical contracting in 2026, this time with Comanche Gas Solutions, he brought that experience with him. He talked the company into buying Conest’s IntelliBid, and he has been using it heavily ever since.

  1. 1997Buys his first estimating software from Conest founder George Hague.
  2. 1997 to 2018Estimates electrical and mechanical work at his own company.
  3. 2018 to 2026Oversees MEP installations for general contractors.
  4. 2026Joins Comanche Gas Solutions, which buys IntelliBid.
  5. TodayHas estimated $7 to $8 million worth of work with IntelliBid.

The Challenge: Estimating by Hand, Row by Row

Before Conest, Paul estimated the way many contractors did at the time: on paper. “I did it on a columnar pad and did it by rows,” he says. “It was very lengthy.”

He knew spreadsheets well, too. He moved from the columnar pad to Lotus 1-2-3 and later to Excel. But a spreadsheet only does the arithmetic. The estimator still has to remember every component of every run and look up the labor for each one.

For the kind of work Paul estimates, that adds up fast. A single underground run can involve conduit, spacers, concrete, trenching, wire, and the labor to install each of them. Multiply that across a site with power distribution, water, sewer, storm drain, and fire protection, and an estimate built by hand quickly becomes a long project of its own.

About Four Times Faster, Right Off the Bat

Conest changed Paul’s estimating immediately. By his account, it made his estimating about four times faster, “right off the bat,” and “it didn’t take long for it to pay for itself.”

Faster From the First Estimate

Paul says Conest made his estimating about 4× faster than working by hand on a columnar pad, and the software paid for itself quickly.

Nearly three decades later, the same pattern repeated at Comanche Gas Solutions. “These guys didn’t mind spending the money,” Paul says, “and I’ve already put together seven or eight million dollars’ worth of work in a very short time.”

Why Assemblies Are Paul’s Go-To Feature

Asked which IntelliBid feature speeds up his work most, Paul answered in one word: “Assemblies.”

An assembly bundles the materials and labor for a complete piece of work. Instead of adding conduit, spacers, concrete, and labor one item at a time, the estimator answers a few questions and the assembly brings in everything it needs. IntelliBid’s database includes duct bank assemblies with and without trenching, along with site work, handholes, medium-voltage cable, and utility distribution assemblies.

You just put the size of pipe in, the linear footage and depth and a few things, and it’s got everything.

Paul FosterComanche Gas Solutions

Paul uses assemblies across the full range of his work. “I do all that kind of work: underground, overhead, everything,” he says. That includes duct banks, site utilities, and rough-in, and the assemblies supply the labor hours along with the material.

He doesn’t always build an estimate exactly the way the database is laid out, and he doesn’t need to. “I get the majority of it, and I get the labor hours for it, and go with it,” he says. “It’s always worked for me.”

Making IntelliBid Fit the Work in Front of Him

Paul describes himself simply: “I just run conduit and pull wire, basically.” His estimates show a deeper understanding of how to make IntelliBid fit the work.

For demolition, he reuses the material and labor already in the database. Taking pipe out costs about the same labor as putting it in, so he applies a labor factor to the installation labor and multiplies it out. He organizes those lines under his own headings, such as demolition for “Type A” or “Type B” buildings, applies labor and material factors, and multiplies by the number of buildings.

He applied the same thinking when he estimated mechanical and plumbing work at his own company. To price copper pipe, he used a comparable item, such as 3/4-inch rigid conduit or Schedule 80, as a basis for labor and cost. A heading made clear what the section really was, so his crews knew exactly what to install.

IntelliBid supports this kind of flexibility. Estimators can add their own items, assemblies, and labor factors, and the database adjusts labor for job conditions such as mounting height, floor level, and length of run.

See Assemblies Build an Estimate for You

Bring a duct bank, feeder, or site utility run to a demo and watch IntelliBid fill in the material and labor.

See It in a Demo

Estimating Before the Engineering Is Finished

Much of Paul’s current work moves faster than the design. “They’re not designed,” he says of the drawings on one project. “We’re having to design on the fly.” In some cases, the engineering is completed after the work is built.

That makes assemblies especially valuable. When there is no complete drawing set to take off from, Paul builds the estimate from what the project needs, such as pipe sizes, run lengths, and depths, and lets the assemblies supply the material and labor.

On projects with complete drawing sets, contractors can add SureCount digital takeoff, which counts symbols on the drawings automatically and sends the quantities into IntelliBid. For Paul’s design-build site work, IntelliBid on its own does the job.

Infrastructure for Data Center Construction

Among Paul’s current projects are man camps, or workforce housing, for data center construction. “It’s basically the infrastructure for a whole city,” he says.

The scope covers sewer, storm drain, water, and fire protection, along with power distribution and a generator plant, all on a fast-paced schedule. It is a different kind of project from the casinos and billion-dollar builds Paul worked on before, and it’s the kind of large, multi-system work Paul estimates with IntelliBid’s assemblies.

A Second Opinion on Subcontractor Pricing

Paul kept using Conest even when he wasn’t bidding work himself. While he oversaw MEP installations for general contractors, he sometimes ran the numbers in Conest to double-check pricing from the trade partners working for the company.

“Even when I was working for the other companies, I would sometimes use yours to double-check the trade partners we had working for us,” he says. Having his own estimate gave him a fair reference point when reviewing subcontractor bids.

Coming Back After Eight Years

When Comanche Gas Solutions bought IntelliBid, Paul installed it on his own computer and picked up where he left off. “I still use it exactly the same as I used to,” he says. Even after eight or nine years away from the software, he was still familiar enough that he needed little training.

He has always had a good experience with Conest’s support team. “I always had a good response from them,” he says. “No problems.”

For estimators who want to go further, Conest training now ranges from basic sessions to advanced database training, with live virtual classroom options throughout the year.

Want to get more from IntelliBid’s database and assemblies?

See Upcoming Training Classes

The Results: Faster Estimates and Millions in Work

Paul’s experience with Conest spans nearly three decades and several kinds of projects. The results have been consistent:

  • About four times faster than estimating by hand, from the start.
  • Quick payback. The software paid for itself at his own company and again at Comanche Gas Solutions.
  • $7 to $8 million worth of work estimated in a short time since IntelliBid was purchased.
  • Assemblies for every kind of site work, including duct banks, site utilities, and underground and overhead power distribution.
  • Flexibility to price demolition and other non-standard work with labor factors and custom headings.
  • Easy to return to. He was productive again quickly after eight or nine years away.

Asked what he would tell another estimator or electrical contractor considering Conest, Paul didn’t hesitate.

Take a look at them.

Paul FosterComanche Gas Solutions

About Comanche Gas Solutions

Comanche Gas Solutions is an integrated energy infrastructure company headquartered in Comanche, Texas. It delivers behind-the-meter natural gas power generation, natural gas fuel management, and turnkey site services for data center, industrial, oil and gas, and demand response customers. Its electrical construction work covers medium-voltage distribution through fixtures and finish. Learn more at comanchegas.com.

Comanche Gas Solutions Case Study: Frequently Asked Questions

Comanche Gas Solutions is an energy infrastructure company headquartered in Comanche, Texas. It provides behind-the-meter natural gas power generation, natural gas fuel management, and turnkey site services for data center, industrial, and oil and gas customers, including electrical construction from medium-voltage distribution through fixtures and finish.

Paul uses IntelliBid to estimate underground and overhead power distribution, duct banks, site utilities, and related work. He relies on pre-built assemblies, which bring in the material and labor for a complete run from a few inputs, such as pipe size, length, and depth.

Yes. IntelliBid’s database includes duct bank assemblies with and without trenching, plus site work, handholes, medium-voltage cable, and utility distribution assemblies. Estimators enter values such as size, length, and depth, and the assembly calculates the material and labor.

No. IntelliBid works on its own, and estimators can enter quantities and assembly values directly. Contractors with complete drawing sets can add SureCount digital takeoff, which counts symbols automatically and sends the quantities into IntelliBid.

Yes. One approach, which Paul Foster uses, is to apply a labor factor to existing installation items and assemblies, organize the lines under a clear heading, and multiply by the number of buildings or units. Estimators can also add their own items and assemblies.

Yes. IntelliBid can be installed on a single PC, on an office network, or used through the hosted CE Cloud platform. Paul Foster runs it on his own computer with one license.

Conest offers training from basic sessions through advanced database training, including live virtual classroom classes, webinars, and a video library. Customers can see upcoming classes on the Conest events calendar.

Estimate Your Next Project With Proven Assemblies

Whether you’re pricing duct banks, feeders, or a full site, the right assemblies can turn a long estimate into a fast one.

See IntelliBid in Action

Bring a recent project to a demo and see how assemblies, labor factors, and live pricing come together in a finished bid.

Request a Demo

Compare IntelliBid Editions

See which features are included in IntelliBid Standard, Plus, and Pro.

Compare Editions

Talk to a Conest Representative